Ads


» » » Altair Flow Simulator 2022.3.0

Altair Flow Simulator 2022.3.0

Author: softwarekeygencrack on 1-05-2023, 01:13, Views: 70

Altair Flow Simulator 2022.3.0
Free Download Altair Flow Simulator 2022.3.0 | 467.8 mb
The software developer Altair is pleased to announce the availability of Flow Simulator 2022.3.0 is the single, unified fluid system design tool/platform for GE Aviation's Thermal System design, Combustion, Lube/fuel systems, and externals teams. It is rooted in decades of practical usage and experience, with aerospace-quality level validation and verification.


Altair Flow Simulator 2022.3.0 Release Notes
Highlights
- Smart element creation.
- Cavity surface creation using CAD curves.
- Merge chambers or thermal nodes.
- Processing controls for controllers.

Smart Element Creation
With this new feature, you can create elements faster by automatically connecting an element to the closest chamber or grid location. Press the "s" key while dragging an element from the element library to the screen to enable smart creation. A red circle indicates the upstream chamber, and the blue circle indicates the downstream chamber. Release the mouse button to automatically create the element and attach it to the chambers.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Cavity Surface Creation Using CAD Curves
You can select cavity surface points directly on CAD curves. Previous versions only used the cursor position on the screen for point creation. To create single points, click on the curve or create multiple points with one click.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Merge Fluid Chambers or Thermal Nodes
You can automatically merge chambers or thermal nodes that lie close to one another. This is useful if duplicate chambers exist after copying a group of elements. It can also be used if automatic element creation using CAD leaves two disconnected elements that should be connected. Use Discard or Undo if there are problems with the merge.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Add Processing Controls to Controllers
The following three types of processing controls have been added to controllers to improve performance and convergence:
1. Iteration Control - Run the controller at specified iterations. Use this instead of adding iteration checks to Python.
2. Flow Convergence Control - Run the controller when flow convergence has reached a multiple of the convergence target. Ten times is default.
3. Gauge Change Control - Run the controller when gauge variables have changed more than a given percentage since the last controller run. If multiple controls are active, the controller is processed if any of the controls are "true". If the controller is not run, then manipulated variables remain at the same value as the previous controller run.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
New Fluid Liquid/Gas Separator Element
A new element separates liquid or gas from a two-phase stream at a chamber. You are required to enter the mass fraction of the liquid or gas to remove. You can use a controller to calculate the separation fraction if needed.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close

Labyrinth Seal Tooth Dependent Inputs
You can input several inputs of the Tooth-by-Tooth labyrinth seal for each tooth. The inputs include tooth geometry such as Pitch, Width, Height, Angle, and Radius from the engine centerline. The Tooth-by-Tooth and Vermes seal have a swirl carryover that can be entered for each tooth. The loss methods for the first tooth of the Tooth-by-Tooth seal have been changed to ignore kinetic energy carryover and stepped effects. This change improves the match to validation data.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Selection Filters
A selection filter is available in the Property Editor to specify which items remain selected for editing. You can select multiple items, sweeping across the screen while clicking the left-mouse button. For example, use the filter to only keep chambers
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Thermal Resistance Inputs for Conductors and Convectors
Thermal resistors take a thermal resistance input in place of geometric and material properties. New input makes it convenient when you need to enter a thermal resistance.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Fixed Flow Element Exit Radius
The fixed flow element has an exit radius input. Previous versions just had a single radius. Use the exit radius for models using fixed flows instead of typical elements (like vortex and orifice) in simplified cavity analysis. If the exit radius is 0, it is assumed to be the same as the inlet radius.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Fixed Flow Element Velocity Input
The fixed flow element has an option to enter the velocity of the flow. Previous versions had options for mass and volumetric flow rates. The velocity option requires a flow area to be entered, too.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Aluminum and Copper Solid Properties
Material properties for aluminum and copper are now included in Flow Simulator
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Solid Properties Written to the *.prop File
Solid properties are located at the bottom of the *.prop file. The solid properties are only written for models that include thermal networks.
Control of Coolprop Mixtures
Coolprop has difficulty with some fluid mixture combinations. A new option mixes Coolprop species using Flow Simulator mixture rules instead of having Coolprop mix internally. Only use this option if Coolprop fails during its own mixing. The properties of the individual species are retrieved from Coolprop. Flow Simulator uses these properties to calculate the mixture properties.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Screen Output Automatically Reduced for Long Runs
Screen output is automatically reduced after the solver iteration count reaches certain thresholds (5,000 and 10,000) during a long run. This typically happens for transient analysis. This change is intended to improve performance. You can still find all convergence information in the convhist_fi.out file.
Improve Reynolds Number Correction
Several elements (orifice plate, transition, valve) use a Reynolds number correction for loss factor (k). Many empirical k's are based on a turbulent Re. If an element has a laminar Re, the turbulent k is corrected. The correction factor can come from tables or an equation. The existing tables were modified to improve performance of the linear interpolation. The equation option was added to the junction and bend.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Move Existing Chamber to a Vertex
Follow the steps below to move an existing chamber (or thermal node) to a vertex.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Batch Mode - New Option to Import Custom Correlations
Use the user interface batch mode to load a file containing custom correlations. This option is useful when building or updating a model using batch.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Automatic Element Creation Improvements
The user interface process for automatic element creation is more robust and faster. The Scan All option creates elements on all cylindrical surfaces in the model that fall within a user-supplied radius range.
Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close
Known Issues
The following known issues will be addressed in a future release as we continuously improve software performance:
- The new controller interface does not work with controllers that have two relations (for example, 1D table and Python script in the same controller).
Resolved Issues
- Fixed solver to release Altair license immediately when you stop the solver before the end of a run.
- No longer allow the Robust solver to be used with the Enthalpy energy option. Robust solver does not work correctly so the program automatically switches to the standard solver.
- The vortex element was not calculating the correct relative temperature. This only affected a vortex element attached to plenum or momentum chambers in the relative frame. Most vortex elements are attached to inertial chambers so they are not affected by this.
- Temperature change limits added to labseal elements to improve robustness.
- Correct labseal pocket heat transfer to use relative instead of absolute total temperature on a rotating surface.
- Fixed user interface problems when trying to create elements from CAD for certain types of surfaces.
- Made the solver version obvious from the Run window so it's clear if a user-specified solver is selected.
- Fixed several problems with importing and exporting files from the user interface.
- Fixed missing Rotation Effects input in the user interface for transition elements.
- Fixed missing unit for fixed flow element flow rate in the multi-case creator.
- Change to correct HTC Relation for Simple Stationary and Simple Rotating compressible tubes.
- Fixed solver bug for Arbitrary Mixture (Coolprop) when Fraction Type = Mole Fraction.
- Change to INCO 625 and PTFE thermal conductivity to improve match to references.
- Valve position has a unit in the interface (percent open and degrees). Where 0%=0 degrees and 100%=90 degrees. This unit is recognized by the Variable Editor.
- Fixed issues with the solver's compressible initializer.
- Fixed issue with the pressure units of "bar" used in controller or FS_coupling.dat.
- Fixed issue when multiples of the same PROPERTY name are used in the file FS_coupling.dat for HyperStudy DOE's.
Altair Flow Simulator 2022.3.0
Flow Simulatoris a 3D design tool that provides interdisciplinary modeling and optimization for fluid and thermal systems within a CAD-integrated environment. System-level design has become increasingly critical as organizations are tasked with simulating complex duty cycles. Fast software solutions like Flow Simulator are needed to model an entire system, including rapid iteration concept modeling and understanding of system simulation and system behavior in applications such as rotating machinery design, electromobility, wind turbines, heat exchangers, and virtually anything that encompasses thermal management. Flow Simulator was originally developed by GE Aviation to serve as a fast flow network simulator for aircraft engines - simulating how an entire flight cycle would behave in the real world, from runway and take off to flight and landing. Since its inception, it has been used to simplify modeling for a variety of complex thermal systems applications, including healthcare, locomotives, and renewable energy.
Altair Flow Simulator - Integrated Thermo-fluid System Design
Altairis a global technology company that provides software and cloud solutions in the areas of simulation, high-performance computing (HPC), and artificial intelligence (AI). Altair enables organizations across broad industry segments to compete more effectively in a connected world while creating a more sustainable future.
TROY, Mich., Feb. 24, 2021 /PRNewswire/ -- Altair announced that it has acquired Flow Simulator from GE Aviation. Flow Simulator is an integrated flow, heat transfer, and combustion design software, which enables mixed fidelity simulations to optimize machine and systems design.
Product:Altair Flow Simulator
Version:2022.3.0
Supported Architectures:x64
Website Home Page :www.altair.com
Languages Supported:english
System Requirements:Windows *
Size:467.8 mb

Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close

Added by 3% of the overall size of the archive of information for the restoration

Altair Flow Simulator 2022.3.0
xAltair Flow Simulator 2022.3.0
Altair Flow Simulator 2022.3.0
Close

Buy Premium From My Links To Get Resumable Support,Max Speed & Support Me


Links are Interchangeable - Single Extraction

  •      Views 70  |  Comments 0
    Comments
    All rights by Softwarekeygencrack.com 2015