Microsoft Windows 7 SP1 -18in1- Activated (AIO) v.7 by m0nkrus
Author: supnatural on 13-02-2018, 05:50, Views: 33
This assembly is the assignee of the assembly of Microsoft Windows 7 SP1 -18in1-Activated (AIO). This assembly is a small reworking of the now classic Microsoft Windows 7 SP1 -18in1-Activated (AIO). Some, alas, do not like the way m0nkrus went in the development of its Windows 7 builds, so it is ready to go along with such comrades. That's why m0nkrus decided to dust off the release of 2011, so that it became comfortable to work with.
This build includes 9 Russian editions and 9 English editions of Windows 7 SP1 for 32-bit (x86) and 64-bit (x64) kernels:
Windows 7 Starter SP1 Russian
Windows 7 Starter SP1 English
Windows 7 Home Basic SP1 x86 Russian
Windows 7 Home Basic SP1 x86 English
Windows 7 Home Basic SP1 x64 Russian
Windows 7 Home Basic SP1 x64 English
Windows 7 Home Premium SP1 x86 Russian
Windows 7 Home Premium SP1 x86 English
Windows 7 Home Premium SP1 x64 Russian
Windows 7 Home Premium SP1 x64 English
Windows 7 Professional SP1 x86 Russian
Windows 7 Professional SP1 x86 English
Windows 7 Professional SP1 x64 Russian
Windows 7 Professional SP1 x64 English
Windows 7 Ultimate SP1 x86 Russian
Windows 7 Ultimate SP1 x86 English
Windows 7 Ultimate SP1 x64 Russian
Windows 7 Ultimate SP1 x64 English
At the end of the installation, you receive a fully registered and activated version of Windows 7 of your choice.
Some features of the assembly of Windows 7 SP1 RUS-ENG x86-x64 -18in1- Activated v.7:
At the heart of the build are the Windows 7 distributions laid out on MSDN on May 12, 2011.
There are four updates in the OS that are installed to support the functionality of the Windows Update Center: KB3172605, KB3177467, KB3138612, KB2534111.
The WUFUC version 0.7.1.81 is integrated into the installed OS, which removes the lock from installing updates through the Windows Update Center on computers with Intel Kaby Lake processors and AMD Ryzen. The shortcuts for managing this utility are available in the "Start" menu.
The Windows Installer, the installed OS and the System Restore Service have three updates that are necessary to support the installation and further use of the system on the NVMe: KB3087873, KB2990941, KB2550978.
In the Windows 7 installer, the installed OS and system recovery service, a number of drivers for NVMe-media are integrated.
A number of drivers for USB 3.x of the following manufacturers are integrated into the Windows 7 installer, the installed OS and system recovery service: AMD, Asmedia, Etron, Fresco Logic, Intel, Renesas, Texas Instruments, VIA.
In the installed OS, tweaks are integrated, adding the items "Copy to folder ..." and "Move to folder ..." in the context menu.
The System Diagnostics and Recovery Toolset (MSDaRT) version 7.0 is integrated into the system recovery service, both launched from the installation media and integrated into the system itself, which significantly expands the resuscitation capabilities of the system.
In the system recovery service, either launched from the installation media or integrated into the system itself, SmartFix module 188.8.131.52 is integrated to automatically solve the most common problems and to treat the OS from malware that antivirus software can not handle.
At the earliest stage of the installation, there is a pre-boot menu, in which you can select the width of the primary shell, that is, which installer will be used, 32-bit or 64-bit. Thanks to this, you do not have to worry that the 64-bit version of the OS may not be on RAID, and that its users may find themselves without a system recovery service.
The installer made the necessary changes, so that the installation under EFI / UEFI was possible not only from the blank, but also from the USB flash drive.
If during installation of the system you have entered a valid license key in the appropriate field, the system will be activated with this key for absolutely legal reasons. If the field is left blank, then alternative methods of activation will be used.
In case you install the system on a computer that has a SLIC-table version 2.1 and higher in the UEFI-BIOS, the standard (almost) activation tools developed by Microsoft for such computers will be used.
If you do not have a license key and there is no SLIC table in the UEFI-BIOS, the system will be activated by the build-in activator built into the assembly.
If you chose to install Windows 7 Ultimate, then upon completion of the installation, you will be able to switch the interface language from Russian to English and vice versa by standard means Windows 7 Ultimate (Maximum). If you installed any other version, you can use the Vistalizator version 2.75 utility for this purpose, the shortcut of which is available in the "Start" menu.
Due to technical features, the 64-bit version of Windows 7 from this assembly can not be installed by updating to the 64-bit version of Windows Vista / 7. However, it remains possible to initiate a so-called Custom installation. When you start the installation from a DVD / USB device, like with a bootable media, it's easy. But to initiate the installation from under the 64-bit OS, it's necessary to start it not through setup.exe in the root of the media with the distribution, but through setup.exe, which is located in the Sources folder of the distribution. Autorun installation media when running from under the existing OS, will choose the type of launch itself.